RKI is proud to offer the next generation of their popular EAGLE portable gas detector. Equipped with features not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO.
PLEASE NOTE: Eagle 2 does NOT have ATEX approval so cannot be used in UK / Europe for Hazardous area applications.
The EAGLE 2 available features include a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases; % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges;
Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications; and a variety of super toxic gases including NH3, AsH3, CO2, Cl2, F2, HF, HCl, NO2, O3, PH3, SiH4, and SO2.
Made in U.S.A.
| Enclosure | Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64. |
| Dimensions | 9.5” L x 5.25” W x 5.875” H |
| Weight | 3.8 Lbs (standard 4 gas with batteries) |
| Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity. |
| Sensor Life | 2 Years under normal conditions. |
| Sampling Method | Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH |
| Display | 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time. |
| Language | Readout can display in 5 languages (English, French, German, Italian, or Spanish. |
| Alarms | 2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable. |
| Alarm Method | Buzzer 95 dB at 30 cm, four high intensity LED’s. |
| Controls | 4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features. |
| Continuous Operation | At 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH. |
| Power Source | 4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines). |
| Operating Temp. & Humidity | -20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing. |
| Response Time | 30 Seconds to 90% (for most gases) using standard 5 ft hose. |
| Safety Rating | Intrinsically Safe, Class I Groups A, B, C, D.Approvals: CSA / CE |
| Standard Accessories | Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter |
| Optional Accessories |
|
| Warranty | Two year material and workmanship, one year for PID sensor |
We are able to provide products and advice usually within short timescales. For product advice, servicing and enquiries, please contact our experienced team: